The AM Auto NNV15-L1-HSS P Nissan NV200 Sliding Window (Driver Side Sliding Door) from Nomadic Supply Company features a solar privacy glass, designed to fit OEM body stampings and utilizes the factory cut-hole. The AM Auto NNV15-L1-HSS P Nissan NV200 Sliding Window (Driver Side Sliding Door) glass has excellent UV filtration at only 17% allowable UV’s.
AM Auto NNV15-L1-HSS P Nissan NV200 Sliding Window (Driver Side Sliding Door) are manufactured from the latest and most sophisticated design processes ensure the window is produced to the highest quality standards. The AMA Half slider latches closed for security and allows for a large ventilation opening.
Simply slide glass and screen independently for a screened or non-screened opening. The fabric screen mesh is housed in an aluminum frame with upper Y springs that allow the screen to be removed by pushing the screen up into the top channel and popping the bottom of the frame out of the lower channel.
AM Auto NNV15-L1-HSS P Nissan NV200 Sliding Window (Driver Side Sliding Door) from Nomadic Supply Company comes with a 6-month Limited Manufacturer Warranty.
AMA (AM Auto) specializes in supplying toughened safety glass, aluminum-framed bonded slider windows. AMA vehicle windows have been accredited by global quality certification including China Compulsory Certification (3C), the US DOT, the European ECE, and Japan JIS. AMA vehicle windows are manufactured in China by one of the largest glass manufacturers in the world.
AM Auto NNV15-L1-HSS P Nissan NV200 Sliding Window (Driver Side Sliding Door) Specifications:
- Fits Chevy City Express and Nissan NV200
- Manufacturer: AMA (AM Auto)
- Manufacturer Country: China
- Manufacturer Warranty: 6 Months
- Glass Color = Solar Privacy Glass
- Glass UV Rating = 17%
|NNV15-L1-HSS P||Driver Side Sliding Door (Slider)|
|NNV09-L1 P||Driver Side Sliding Door (Solid)|
|NNV09-L2S P||Driver Side Rear Quarter (Solid)|
|NNV09-US-LB P||Driver Side Rear Cargo Door (Solid)|
|NNV15-R1-HSS P||Passenger Side Sliding Door (Slider)|
|NNV09-R1 P||Passenger Side Sliding Door (Solid)|
|NNV09-R2S P||Passenger Side Rear Quarter (Solid)|
|NNV09-US-RB P||Passenger Side Rear Cargo Door (Solid)|
|What’s needed to Install it?|
| This window is installed with Urethane Adhesive, you will need a primer base, and we recommend edge molding for the cut edge.
|How will I install this window?|
| The NV200 Van Windows, City Express Van Windows utilizes factory metal stamping; on the van’s interior, you will notice an area where the inner metal ends. Here is a photo to clarify. You will cut right along with that edge around your van may have multiple uprights. You will cut those out straight with your opening.
REPLACING AN EXISTING OEM WINDOW:
When replacing an existing factory window, you may want to contact us or provide photos inside and out. Not all replacements will be straightforward and require extra commendation and custom adaptation to use an existing factory or add-on item(s). Van Windows Direct and the manufacturers we distribute take no responsibility for additional work or an installer’s inability to complete the work required. Please ask all questions and provide all information before purchase, as the buyer is 100% responsible for the installation or failure to install.
If you are replacing a factory window that urethane bonded, you may want to take it to a professional for removal and replacement. If doing it on your own, the best tool is a wire cutter Equalizer Window Cut-Out Set. Once the window is cut out, you will need to cut the original urethane down as flat as possible and clean as much away as possible. We offer CRL Adhesive Cleaner. Other products that can help clean up the existing urethane are (Acetone, Goo-Gone, and WD-40). After using any cleaning product, clean the wall with soap and water or rubbing alcohol.
ADDING WINDOW TO A VAN WITHOUT WINDOWS:
If you have the following tools, cutting can be done inside with no template or mirroring of the interior stamping to the outside. (Body Saw, Air Saw, One-Handed Reciprocating Saw)
Drill a hole with a bit large enough to accommodate the blade of your cutting tool. Drill within the single sheet metal section that will be cut out, then work your knife down to the OEM stamp line. Follow the stamp line around the area to produce your window cut hole. (Any internal support in the window sections can be cut out as unnecessary).
**TIP – Cut sides and bottom first leaving the top cut for last, so the sheet metal does not start bending while cutting.
Once your hole has been cut, file any rough edges or high points to smooth the cut line. While most will trim and not see the raw edge, the smoother and straighter the cut, the better the trim will appear when it is time to place it. Once happy with the cutout and filed down soft, you may want to prime the raw edge of the metal before installing edge molding. While this is unnecessary, it’s easy and offers additional peace of mind.
If you are using edge molding, now will be the time to install it. Window Edge Molding is not necessary for the installation of the window. Covering the raw cut edge will offer a better appearance on the van’s interior. If your interior walls cover the cut edge, then there is no reason to trim something that will be hidden. When ordering trim, it is sold from a bulk roll by the foot, and there is a drop-down box for proper sizing for your van. Most vans will cover the inner and outer sheet metal edges with the trim. The trim on the outside will not affect the window installation as the urethane bead will be taller than the thickness of the frame.
**TIP – Dry fitting the window before urethane bonding can help familiarize yourself with placement. Also, you can place securing tape/masking/painters’ tape in corners and side middle on to glass, then onto body cut tape, leaving on both window and van body as added line-up markers for easier placement.
URETHANE BONDING OF WINDOW:
Using a urethane primer, apply it to the outside of the body. You want to lay close to the opening but allow a 1/2″ gap when possible that way, when the urethane is applied and spreads less likely to have urethane seeping out from the glass edge on the outside of the van. Again, only one Primer line is needed and only on the Van wall. Multiple bars and Primer on the glass are unnecessary and ultimately a product waste. After you have painted your primer line around your cut hole, allow the Primer to dry for about 10 minutes.
When using Automotive Urethane, a regular everyday caulking gun will not work. We recommend no less than a 12:1 Thrust Ratio (Commercial/Professional Grade) or above.
If you order the urethane from us, the tip will have an embossed cutline showing a cut across the information and a v-notch. This will be where you will want to cut the lead for your perfect-sized urethane bead. When applying the urethane to the van, the V will trail your application patch, so you end up with a pyramid-looking dot.
We recommend starting a few inches down from the top rear corner of the window so you can avoid having a joint from one tube to the next on the top or front of the window. If it happens, it will not be a catastrophe, just if it can be done where the top and front are one continuous bead that reduces the risk of a leak. With more oversized windows (Most side OEM fit window), will require a second tube of urethane when one bead end starts the next about a 1/2″ into the already applied bead (smooth together with a plastic putty knife/wood stick, flat screwdriver, etc…) Spraying a liberal amount of glass cleaner onto the tool will help keep the urethane from sticking to the device and clumping.
**TIP – When applying urethane, bead consistency is key to a great install. Thicker and thinner spots can lead to leakage.
INSTALLING WINDOW TO URETHANE:
Having two people for window placement is always nice one holds the front bottom corner, the other the rear bottom corner. OEM fit windows will have a 1/4″ gap from the body line to the glass. Get the bottom edge lined up, holding the glass back away from the wall on top at a slight angle / once you have your gap lined up at the bottom and your front and rear edges are lined up where you want, tilt the window up and press into urethane you do not need to push too hard as the urethane has firm adhesion and will grab on to window quickly. Keep a hand pressing on the window to keep the position. If all is good, open your hand and smack the glass down, following the patch of your urethane bead. The goal of modern vans with insert areas for windows will be to get the drink even with the outer body of the van body above and below the window section, so it is a fluid transition from sheet metal to glass to sheet metal again.
Once the window is in the desired location, use Window securing tape to tape each corner with 3-4 strips to keep the glass in place. If you plan on driving a van within the first 24hrs, you can also tape the edge all around to keep the urethane beads clean from contaminants while traveling.
3-Hours of set time before driving (Keep all windows closed and A/C using recirculate during the first 24hrs)
3 Days minimum before washing vehicle (Some car wash soaps have alcohol that can deteriorate some of the urethane seals)