The Blue Sea 5026 ST Blade Fuse Block w/Cover 12 Circuit w/Negative Bus can offer a space-saving and cost-effective solution to adding circuit protection when there are limited available circuit breakers on the distribution panel. A single circuit breaker on a distribution panel can provide the circuit protection for the feed wire to the ST Blade Fuse Block. This is frequently done for electronics that each have their own ON-OFF switch and doesn’t require the switching offered by a circuit breaker. The 6 or 12-position ST Blade Fuse Block then provides a consolidated location for fuses for each of the electronics.
Blue Sea 5026 ST Blade Fuse Block w/Cover 12 Circuit w/Negative Bus Features:
- Clear insulating cover with label recesses accept Small Format Labels
- Cover Satisfies ABYC/USCG requirements for insulation
- Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
- Accepts ATO and ATC fast-acting blade fuses
- 20 write-on circuit labels included
- Positive distribution bus with #10-32 stud
- Can be used for 24-hour circuits
- Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy-to-open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems” Small Format Labels for circuit identification
- Fuse blocks with covers include 20 write-on circuit labels
- Tin-plated copper buses and fuse clips
- Accepts ring or snap fork-type terminals
- Accepts ATO® and ATC® fast acting blade fuses
- Fuses sold separately
Blue Sea 5026 ST Blade Fuse Block w/Cover 12 Circuit w/Negative Bus Specifications:
Circuits | 12 |
Maximum Amperage | 100A per block 30A per circuit |
Maximum Voltage | 32V DC |
Mounting | #8 Screw (M4) |
Negative Bus | #10-32 Stud |
Positive Bus | #10-32 Stud |
Recommended Torque | 24 in-lb (2.71 N m) |
Screw Terminal Torque | 18 in-lb (2.03 Nm) |
Screw Terminal Type | #8-32 Screws with captive star lock washer |
Weight | 0.75lb (0.25 kg) |
Dimensions | 6.472″ h x 3.315″ w x 1.518″ d |