Blue Sea Systems ST CLB Circuit Breaker Block – 12 Position
Blue Sea Systems Features
- Quick connect clips allow circuit breakers to snap easily into place
- Tin-plated copper busses and screw terminals
- Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
- Easy to open clip on cover
- Breakouts allow wire access in two directions
- Accepts ring terminals
- Optional push button waterproof boots or dress nuts can be installed over cover
Specifications:
Blue Sea Systems Circuits:
12
Blue Sea Systems Maximum Amperage:
32A (per circuit) 40A (per jumped circuit group)
Blue Sea Systems Maximum Voltage:
32V DC
Blue Sea Systems Mounting:
#8 Screw (M4) or #8 Nut
Blue Sea Systems Source:
Independent Source
Blue Sea Systems Minimum Operating Temperature:
-10° C
Blue Sea Systems Maximum Operating Temperature:
60° C
Blue Sea Systems Mounting Centers:
10.13″(257.3 mm)
Blue Sea Systems Screw Terminal Type:
#8-32 Screws with Captive Star Lock Washer
Blue Sea Systems Height:
6.69″(169.93 mm)
Blue Sea Systems Weight:
1.50lb (0.68 kg)
Blue Sea Systems Manufacturer Part No :
5051
UPC :
632085050511
Blue Sea ST CLB Circuit Breaker Block – 12 Independent Circuits
Model: 5051-BSS
- Quick connect clips allow circuit breakers to snap easily into place
- Tin-plated copper busses and screw terminals
- Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
- Easy to open clip on cover
- Breakouts allow wire access in two directions
- Accepts ring terminals
- Optional push button waterproof boots or dress nuts can be installed over cover
- Accepts square labels
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse.
The ST CLB Circuit Breaker Block offers flexible resettable circuit protection for 12 circuits in a surface mount block that is easy to mount in a dry and protected location. A natural companion for waterproof switching is the new WD Switch Only Panel, that will keep circuits protected from spray and offer integrated switch guards to reduce the risk of accidental switching.
Specifications:
| Circuits | 12 |
| Maximum Amperage | 32A (per circuit) 40A (per jumped circuit group) |
| Maximum Voltage | 32V DC |
| Source | Independent Source |
| Mounting Centers | 10.13in (257.3 mm) |
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to