Although every wire on a boat requires circuit protection, not every circuit needs to be capable of being switched On and Off, or the circuit has an independent remote switch. That’s where the Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar from Nomadic Supply Company comes in.
The advantage of a resettable circuit breaker over a fuse is well known, however, people often think of circuit breakers as more expensive and difficult to install.
The Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar solves this issue by using economical, compact, snap-in-place, CLB resettable circuit breakers which make breakers as easy to install as a fuse.
This bus bar version of the CLB Breaker Block has a common positive bus terminal to supply power to as many as 6 or 12 circuits, and a negative bus bar which serves as a common ground for all those circuits, making for easy wiring.
Of course, any of the devices powered through this breaker block can be controlled via a remote switch, as necessary, or several of the positive leads can be routed through a switch panel, as in one of the accompanying diagrams. In addition, there is the option to install a “master” switch in the wire going to the positive bus terminal to control all the circuits simultaneously.
Note – Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar is designed to provide branch circuit protection downstream of the electrical system’s main circuit protection fuse or circuit breaker.
Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar Features:
• Uses CLB push-button reset thermal circuit breakers (only one 15A breaker is included)
• Quick connect clips allow circuit breakers to snap easily into place
• Tin-plated copper busses and screw terminals
• Clear insulating cover insulates and protects the breakers and connections and satisfies ABYC/USCG insulation requirements
• Clear cover has small size square format recesses for Blue Sea square labels
• Easy to open clip-on cover
• Breakouts allow wire access in two directions
• Accepts ring terminals
• Optional push-button waterproof boots or dress nuts can be installed over the cover
Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar Specifications:
Circuits: 6
Maximum Amperage: 100A (per block) 32A (per circuit)
Maximum Voltage: 32V DC
Mounting: #8 Screw (M4) or #8 Nut
Negative Bus: Yes
Source: Common Source
Minimum Operating Temperature: -10° C
Maximum Operating Temperature: 60° C
Mounting Centers: 5.63″(143 mm)
Screw Terminal Type: #8-32 Screws with Captive Star Lock Washer
Height: 6.69″(169.93 mm)
Weight: 0.75lb (0.34 kg)
Blue Sea 5052 ST CLB 6 Circuit Breaker Block with Negative Bus Bar Optional Accessories:
4135
Push Button Reset Only Circuit Breaker Boot – Clear
4215
Waterproof DC Label Kit – 30 Black Square Labels V1
4216
Waterproof DC Label Kit – 60 Black Square Labels
4217
Waterproof DC Label Kit – 120 Black Square Labels
4218
Waterproof DC Label Kit – 30 Black Square Labels V2
5049
ST CLB Circuit Breaker Block Jumper
7050
Push Button Reset Only Quick Connect Circuit Breaker – 3 Amps
7052
Push Button Reset Only Quick Connect Circuit Breaker – 5 Amps
7053
Push Button Reset Only Quick Connect Circuit Breaker – 7 Amps
7054
Push Button Reset Only Quick Connect Circuit Breaker – 10 Amps
7056
Push Button Reset Only Quick Connect Circuit Breaker – 15 Amps
7057
Push Button Reset Only Quick Connect Circuit Breaker – 20 Amps
7058
Push Button Reset Only Quick Connect Circuit Breaker – 25A
7059
Push Button Reset Only Quick Connect Circuit Breaker – 30 Amps
7061
Push Button Reset Only Quick Connect Circuit Breaker – 40A