The Blue Sea 8053 Slate Grey 6 Position Vertical Power Distribution Panel is designed for flybridges and open cockpit applications. It is a waterproof panel that accepts both AGC fast and MDL slow blow fuses.
The Blue Sea 8053 Slate Grey 6 Position Vertical Power Distribution Panel will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions.
ON-OFF Contura Switches with On indicating LEDs embedded in the switches.
Each switch is fused to accept either AGC Fast-acting or MDL Slow Blow 1/4″ x 1-1/4″ glass fuses.
Blue Sea 8053 Slate Grey 6 Position Vertical Power Distribution Panel Features:
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- Designed for flybridge and open cockpit applications
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
Blue Sea 8053 Slate Grey 6 Position Vertical Power Distribution Panel Specifications:
- Weatherproof: Water Resistant
- Positions: 6
- Nominal Voltage: 12v / 24v DC
- Panel Cumulative Rating: 45A
- Switch Rating: 20A @ 12v DC / 15A @ 24v DC
- Height: 7.5″
- Width: 5.25″
- Depth: 3″
Included:
- (6) 5021 Panel Mount AGC/MDL Fuse Holder
- (1) 8030 Basic DC Panel Label Set – 30 Labels
- (6) 8230 Contura Switch SPST Gray – OFF-ON
*NOTE: Waterproof panel labels are not backlit
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to