Hubbell 100A Shore Power Inlet 125/208V (M5100B9R) Gray nylon shore power inlet has gasketed, spring-loaded cover which closes automatically when not in use and is watertight when securely fastened. Mounting holes are 4.88 in. (123.8) on centers and rear portion has 3.94 in. (100.0) diameter. Mounting screws and gasket included.
Heavy-Duty Products, IEC Pin and Sleeve Devices, Marine Grade, Male, Flanged Inlet, 100A 3-Phase Wye 120/208V AC, 4-Pole 5-Wire Grounding, Terminal Screws, Yellow
Gray Amaplast shore power inlet has gasketed, spring-loaded cover providing an IP67 watertight rating (withstands temporary immersion) when tightened.
Hubbell 100A Shore Power Inlet 125/208V (M5100B9R) Features:
- 100A
- 3 phase Y120/208
- 4 Pole 5-Wire
- Solid one-piece pins for reliable electrical contact
- Gasketed sealing ring provides watertight seal
- Raised collar surrounds each phase pin
- Electrical – Current Interrupting – Certified for current interrupting at full rated current
- Electrical – Dielectric Voltage – Withstand 3000V AC
- Electrical – Max. Working Voltage – 600V RMS
- Environmental – Flammability – HB or better per UL 94 or CSA C22.2 No. 0.17
- Environmental – Ingress Protection – IP67 Suitability
- Environmental – Moisture Resistance – Watertight per IEC 60309-1
- Environmental – Operating Temperatures – Maximum Continuous 75°C
- Minimum – 40°C w/o impact
- Mechanical – Impact Resistance – Per CSA C22.2 No. 182.1 / UL1682
- Mechanical – Product Identification – Ratings are a permanent part of the device housing
- Mechanical – Terminal Identification – Terminals identified in accordance with North American and IEC conventions
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to