Skip to content

Mid City 360 Degree Camera Always-On Programmer for 2019+ Mercedes Sprinter (907OBD360)

$260.00

10% of profits donated to Sierra Club and 1% of all sales donated to Stripe Climate Change initiative.

Are you as frustrated as we are when your 360 degree camera shuts off as soon as you reach 10MPH? The Mid City Engineering Mercedes Sprinter 360 Degree Camera Always-On Programmer allows the Mercedes-Benz Sprinter OEM 360 Camera Button to Work at Speeds Above 10MPH! As all of you with the VS30 907 Sprinter are aware, the moment you get to 10MPH, your 360 cameras shut down; the Mid City 360 Degree Camera Always-On Programmer for Mercedes Sprinter VS30 is the solution to have your cameras on while driving!

The Mid City Engineering Mercedes Sprinter 360 Degree Camera Always-On Programmer works ONLY with these Sprinters:

2019+ Sprinters with the factory 360 camera system
2019+ Sprinters with MBUX backup camera and factory parking sensors.

Mid City Engineering Logo

Are you as frustrated as we are when your 360 degree camera shuts off as soon as you reach 10MPH? The Mid City Engineering Mercedes Sprinter 360 Degree Camera Always-On Programmer allows the Mercedes-Benz Sprinter OEM 360 Camera Button to Work at Speeds Above 10MPH! As all of you with the VS30 907 Sprinter are aware, the moment you get to 10MPH, your 360 cameras shut down; the Mid City 360 Degree Camera Always-On Programmer for Mercedes Sprinter VS30 is the solution to have your cameras on while driving!

The Mid City 360 Degree Camera Always-On Programmer is locked to the VIN of the vehicle so if you lose the programming you can easily reprogram with the unit.

Mid City Engineering OEM 360 Degree Camera On-Demand for 2019 – 2021 Sprinter (907) OBD Programmer has Two programming options:

Allows OEM 360 degree camera to be turned on at speeds above 10 MPH or use 360 camera without any 10 MPH auto cutoff for full control

The Mid City Engineering Mercedes Sprinter 360 Degree Camera Always-On Programmer works ONLY with these Sprinter vans:

2019+ Sprinters with the factory 360 camera system
2019+ Sprinters with MBUX backup camera and factory parking sensors (as pictured below).

If your Sprinter only has the basic backup camera, it will not work at this time. We are working on a programmer for the basic backup camera only which we are hoping to have ready in a few months.

Mid City 360 Degree Camera Always-On Programmer for 2019+ Mercedes Sprinter (907OBD360)

This is how the display will appear on the 2019+ Sprinter with MBUX backup camera and factory parking sensors.

Mid City Engineering OEM 360 Degree Camera On-Demand for 2019+ Sprinter Features:

  • Plug & play OBD programmer- installs in minutes
  • The OEM 360 camera button only activates the 360 degree camera at speeds below 10 MPH. Remove that limitation with this programmer.
  • For vehicles equipped with backup camera only will allow for backup camera on-demand if  it is equipped with the factory park assist module.
  • SKU 907OBD360
  • Turn your 360° Camera on from the steering wheel
  • Turn your 360° Camera on automatically when vehicle is shifted into Drive at any time (not just after reverse)
  • Module features analog trigger input for external use (Such as Brandmotion’s Curb Alert System: Curb Alert)
  • Turn your 360° Camera on automatically when your vehicle travels below 5 mph

OEM 360 Degree Camera On-Demand for 2019 – 2021 Sprinter (907) OBD Programmer Compatible vehicles:

  • Sprinter 2019+
  • Only compatible with MBUX equipped Sprinters with OEM 360 camera or backup camera only MBUX Sprinters with factory park assist module. 

Mid City Mercedes Sprinter 360 Degree Camera Always-On Programmer Programming Options:

Default programming:

Allows camera button on OEM radio to activate the 360 camera above 10 MPH. Please note: if the camera is on below 10 MPH (either from the button or from the gear position) once the vehicle reaches 10 MPH, the camera will shut off automatically and can be turned back on using the button above 10 MPH. For example, if you shift into reverse and then to drive the 360 degree camera will be on automatically in drive- with this programming option, the 360 camera view will turn off automatically when the vehicle reaches 10 MPH (same as the OEM spec). Once the vehicle is above 10 MPH, the 360 camera view can be turned back on using the camera button- the 360 camera view will stay on until a) the button is pressed again or b) the vehicle travels below 10 MPH and then back above 10 MPH.

Always-on Programming:

The alternative programming method removes the 10 MPH cutoff and any time the 360 camera is on it needs to be turned off manually by pressing the camera button. For example, if you shift into reverse and then to drive the 360 degree camera will be on automatically in drive- with this programming option, the 360 camera view will stay on until it is manually turned off.

Mercedes Sprinter 360 Degree Camera Always-On Installation Guide:

The 907-OBD-360 is an OBD programmer to allow for on-demand use of the OEM 360 degree camera at speeds above 10 MPH (from factory the camera button cannot activate the 360 degree camera view above 10MPH).

There are 2 different programming options and ways to use this feature plus the option to program the vehicle back to OEM specs.

Default programming (option 1):

  • Allows camera button on OEM radio to activate the 360 camera above 10 MPH. Please note: If the camera is on below 10 MPH (either from the button or from the gear position) once the vehicle reaches 10 MPH, the camera will shut off automatically and can be turned back on using the button above 10 MPH.
  • For example, if you shift into reverse and then to drive the 360 degree camera will be on automatically in drive- with this programming option, the 360 camera view will turn off automatically when the vehicle reaches 10 MPH (same as the OEM spec). Once the vehicle is above 10 MPH, the 360 camera view can be turned back on using the camera button- the 360 camera view will stay on until a) the button is pressed again or b) the vehicle travels below 10 MPH and then back above 10 MPH.

Additionally- if the 360 camera view is turned on at a speed less than 10 MPH using the button, the camera view will shut off when the vehicle reaches 10 MPH- but again can be turned back on using the button above 10 MPH.

”Always-on” programming (option 2):

  • The alternative programming method removes the 10 MPH cutoff and any time the 360 camera is on it needs to be turned off manually by pressing the camera button.
  • For example, if you shift into reverse and then to drive the 360 degree camera will be on automatically in drive- with this programming option, the 360 camera view will stay on until it is manually turned off.

The third programming option returns the 360 camera settings to factory ”specs.

During the programming procedure, the turn signal stalk position determines which programming is performed.

  • Turn signal stalk position neutral (not pushed up (right turn signal) or down (left turn signal) is the default programming. Do not move the turn signal stalk at all during programming if you want to program the default setting for this feature programmer
  • Turn signal stalk pushed down (left turn signal) during programming is for the “always on” programming (option 2). If this option is desired, have the turn signal stalk pushed down (left turn signal) during the programming procedure
  • Turn signal stalk pushed up (right turn signal) during programming will return the 360 camera settings to OEM specs. If this option is desired, have the the turn signal stalk pushed up (right turn signal) during the programming procedure

Turn vehicle ignition on and position turn signal stalk

      • Press push to start button 2X (ignition on)
      • Verify that ignition is on by confirming that warning lights are illuminated on instrument cluster
      • At this point, you will position the turn signal stalk based on which programming option is desired. You will leave the stalk in this position throughout the programming procedure.
      • For default programming (option 1) do not move the turn signal position (neutral)
      • For “always on” programming (option 2) push the turn signal down (left turn signal)
      • To program the 360 camera option to factory specs, push the turn signal ‘‘up (right turn signal)”
      • For details on the different programming options see the guide introduction above

Turn ignition off and plug in OBD programmer

    • Turn ignition off and plug OBD programmer into OBD port

Turn ignition on

    • Press push to start button 2X to turn ignition on
    • LED inside OBD programmer case (observable through hole at end of case facing in floor) should turn on
    • After programming is complete, LED on programmer will turn off
    • If LED is off and you have not seen it turn on, it likely has already programmer (programming can happen within seconds of turning ignition on)

REMOVE OBD PROGRAMMER

    • Turn ignition off and remove OBD programmer
    • DO NOT START ENGINE OR DRIVE VEHICLE WITH OBD PROGRAMMER PLUGGED IN
    • The turn signal stalk (if moved) can be returned to the neutral position

Test Operation

    • Make sure that OBD programmer is removed before starting vehicle or driving
    • Test OEM 360 camera button above 10MPH making sure that 360 degree camera turns on
Weight 1 lbs
Dimensions 8 × 8 × 5 in

Brand

Mid City Engineering

When it comes to upgrading luxury vehicles with modern electronics, Mid City Engineering provides solutions that are unmatched in the industry. Known best for its SmartKey Starter solutions for Mercedes-Benz vehicles, Mid City integration products provide drivers with OEM control and features that simply aren’t available anywhere else.
Mid City Engineering Logo

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John K.
Mid City 360 Camera Programmer

Easy set up and works great! Great to have the option to view on the dash while driving to see blind spots and other vehicles. Thanks!

WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.