The REDARC BCDC1212T 12A Vehicle DC Battery Charger from Nomadic Supply Company is designed to charge your auxiliary battery to 100% state of charge while on the move via your alternator. Connecting directly to the trailer plug, the REDARC BCDC1212T 12A Vehicle DC Battery Charger provides 3-stage battery charging for optimum battery charge, protecting the truck’s start battery from discharge while charging the auxiliary battery responsible for operating winches, hydraulic pumps, dump trailers, liftgates and boat trailers.
This dump trailer charger is compatible with all battery makes and chemistries, including Standard Lead-Acid, Calcium, Gel, AGM and Lithium LiFeP04.
It operates in a 12- or 24-volt vehicle and is 12 Amp input current limited to charge your secondary battery banks to 100% state of charge while on the move.*
*large capacity battery banks may require a few cycles to fully charge.
Proven to operate under extreme heat of up to 176°F, our REDARC BCDC1212T 12A Vehicle DC Battery Charger is sealed to eliminate the risk of dust or water ingress, and is made in Australia by Australia’s leading battery charging and overlanding accessories company.
The REDARC BCDC1212T 12A Vehicle DC Battery Charger is heat, water, dust and vibration proof.
The REDARC BCDC1212T 12A Vehicle DC Battery Charger ensures little to no mains charging is required for your trailer battery, meaning you can charge the trailer battery while you drive and reduce the need to plug into the socket to top-up battery charge.
The REDARC BCDC1212T 12A Vehicle DC Battery Charger comes pre-wired with wiring harness allowing easy installation into any typical trailer battery setup, or other trailers where the secondary battery’s charging current is drawn from the 12V Auxiliary Power available on a pre-installed, suitably rated, trailer plug and towing harness.
REDARC BCDC1212T 12A Vehicle DC Battery Charger is an Official Nomadic Supply Company Product that we use on our own Mercedes Sprinter vans!
REDARC BCDC1212T 12A Vehicle DC Battery Charger Specifications:
Input Voltage9 – 32 VOutput Voltage12vMaximum Charging Voltage15.3VCountry of ManufactureAustraliaOutput Power147 (12v vehicle | 294 (24v vehicle)Input Fuse Rating15 A – 23 A (FK23 recommended, not suppliedOutput Fuse Rating30A (FK30 recommended, not supplied)Length (in)6.5” (165 mm)Width (in)4.7” (120 mm)Height (in)1.5” (37 mm)Warranty2 yearsWeight (lb)30 oz (0.85 kg)Standby Current Draw<8mA