The SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) from Nomadic Supply Company has vacuum mount technology that lets you attach and remove any off-roading LED light bar anytime you want, while providing a rock-solid connection to your vehicle. The SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) works with any brand and any length LED light bar; just attach one of the Light Bar Mounts to each end of your light bar!
SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) comes in a PAIR so you do not need to order two to mount one light bar.
Light Bar Mounts have a durable, 1/2” thick HDPE universal mounting deck with 5/16”x1” mounting slot to accommodate any light bar mounting configuration. Hardware to connect the light bar to the universal mounting deck is not included since the appropriate nuts and bolts depend on the light bar brand.
SeaSuckers are vacuum mounts, not suction cups. There’s a big difference between the two. First, each 6″ SeaSucker vacuum mount is pull rated at over 210 lbs. Each 4.5” SeaSucker is pull rated at over 120 lbs. Suction cups also lack one incredibly important safety feature: the indicator band. SeaSucker’s orange indicator band begins to appear once the vacuum mount loses some of its suction, letting you know it’s time to re-pump well before it detaches.
SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) Specifications:
LED Light Bar Mounts have a durable, 1/2” thick HDPE universal mounting deck with 5/16”x1” mounting slot to accommodate different brand’s mounting configurations.
SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) Includes:
Hardware to connect the light bar to the universal mounting deck not included since the appropriate nuts and bolts depend on the LED light bar brand.
SeaSucker Vacuum Off-Roading LED Light Bar Mount (SM6110) FAQ’s:
Q: How strong are the vacuum mounts?
A: “Strong like bull.” 4.5” vacuum mounts have a rated pull strength of 120lbs, pulling straight out from center. Pull strength on a shear load, i.e. pulling from the side, will be less. 6” vacuum mounts are 210lbs rated. Obviously, putting multiple vacuum mounts on a single product multiplies the maximum holding power.
Q: How long do the vacuum mounts last before they lose power?
A: There’s no set time limit on our vacuum mounts. It depends in part on the surface you attach to, the condition of the vacuum mount, the load you put on it, and other factors. As for surfaces to attach to, vacuum mounts in general were designed to carry big sheets of glass and other solid surface materials, so smoother, flatter surfaces are ideal. Clean surfaces and clean SeaSuckers go a long way to maximizing the hold time. In any event, if the vacuum mount begins to lose some vacuum, it will warn you so you can get it back to full power before it comes off. The vacuum pump’s plunger will extend from the pump cylinder when it starts to lose power, revealing an orange indicator band. Once you see orange, that’s your cue to repump your SeaSucker. For car racks, the simplest thing to do is to check the rack before you get in your vehicle, and check it each time you stop for gas, food, or the bathroom.
Q: Do I need to clean the surface I’m going to attach my SeaSucker to?
A: Clean off any surface dirt from the mounting surface before attaching your SeaSucker. While you’re at it, make sure the sealing edge of the vacuum pad is clean too. You don’t have to clean the mounting surface with alcohol wipes, as one overly-enthusiastic customer told us they do, but a quick wipe with a wet paper towel or napkin wouldn’t hurt.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to