Skip to content

sPOD BantamX Modular 8-Switch Panel w/ Amber LED 84″ Battery Cables (BX-MOD-84-A)

$910.00

10% of profits donated to Sierra Club and 1% of all sales donated to Stripe Climate Change initiative.

sPOD BantamX Modular 8-Switch Panel w/ Amber LED 84″ Battery Cables (BX-MOD-84-A)

sPOD Logo
GTIN: 816482022429 SKU: BX-MOD-84-A Category:

The sPOD BantamX Modular 8-Switch Panel will save hours of wiring and installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories.

Due to the small footprint of The sPOD BantamX Modular 8-Switch Panel, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle’s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

Features:

  • BantamX Modular w/ Amber LED with 84 Inch battery cables
  • Fully programmable, digital controlled system
  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block (easily attach accessories)
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff (LVCO) battery protection w/ optional override
  • One ATM mini-style fuse for LVCO protection and reset
  • Failsafe self-healing fault protection system (from 1.5 to 30amps)
  • Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)
  • 50amp auto-resetting circuit breaker
  • Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
  • Operates on 12VDC or 24VDC
  • 8-position input terminal block for controlling outputs
  • Built-in Bluetooth capabilities for remote control
  • Protection against: overheating, over-current, shorts, reverse polarity and field collapse
  • Ignition control and safety lock-out for switches 1 and 2 (optional)
  • Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen
  • On-demand wireless software updates/upgrades

Hardware:

  • Powder coated steel base w/ built in hardware
  • Silicone gasket for weatherproofing
  • Aluminum lid
  • Vehicle specific mounting options
  • Robust insulated base and cover

Features Available Through sPOD Mobile App (free):

  • Each switch can be programmed for:
  • Dimming
  • Strobe
  • Flash
  • Momentary
  • Switch Linking
  • On Road and Off Road mode of operation

The following features are only available through the purchase of our Pro-Series App:

  • Circuit timers
  • Switch lockout
  • Initial startup current for each circuit is raised to 65amps for 5 seconds
  • Program any circuit to be always on while still maintaining fault protection
  • Option to disable deep sleep mode
  • Selectable auto restart after circuit shuts down from over current/short
  • Programmable Current Limiting (in 2amp increments up to 30amps)
  • Selectable auto restart for current limiting shut down
  • Selectable Latch or Momentary actions for inputs
  • Programmable ignition control for all 8 circuits
  • Variable strobe function to create custom flash/strobe patterns

External Controller Options (not included with system and can only be used in conjunction with an sPOD controller):

  • Third party switches
  • Computers
  • Arduino
  • Raspberry Pi
  • Alpine Audio systems KAC-001 head unit controller
  • Sensors, thermostats, pressure switches, fan controllers and more

Switch Panel:

  • Switch panel with eight dual lit LED Amber switches (installed and pre-wired)
  • All wires are wrapped in high-temp abrasion resistant nylon braided sleeving.
  • Comes with a 10 foot CAT-6 Ethernet, can be extended up to 25-feet from BantamX)
  • Each switch has 2 programmable modes: strobe or flash
  • Aluminum panels are formed, welded and powder coated
  • Carling Technologies Contura switches (certified to IP66/68 – marine/harsh environment)
  • Controlled lower pilot light (push button)
  • Custom laser-etched rockers are available
  • Ability to daisy chain panels for remote operations (ie: panel in cab and panel at rear of truck)
  • Auto safe system shutdown when panel is unplugged
  • Can run in conjunction with another 8-Switch panel, HD and Touchscreen
  • Two RJ45 ports available integrated into the CAN-Bus controller

Brand

sPOD

sPOD has been in business since 2005 with our first systems designed and manufactured for Jeep TJ Wranglers. We started out as a small family owned and operated business based in southern California. Our equipment is 100% made, assembled and shipped in the United States. We have a quality program in place in order to produce the highest quality power distribution systems on the market. Every single system is bench tested as a unit as the customer ordered it.
sPOD Logo
Weight 5 lbs
Dimensions 13 × 10 × 10 in
WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.