Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102)

Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) from Nomadic Supply Company is a compact 30 Amp charger with a single output.  It is Bluetooth enabled and can be programmed using the Victron Connect app.  Pre-made programs include Lithium Batteries.  Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) is a fully programmable charger with an extensive menu option accessible using “expert mode” as well as a simple menu setup for the less experienced user.

The Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) can now be configured for synchronized charging using Victron VE Smart Wireless Networking. With this feature, make a 12V 60A,  or even higher power charger that is (a) parallel redundant, (b) easy to mount in tight places, and (c) very attractive cost-wise

Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) Features:

• 120 VAC input, 12 VDC output, 30 Amps
• Fully programmable via Bluetooth
• Built-in Lithium Battery program
• 6-stage adaptive charge algorithm
• The programmable noiseless setting for nighttime use
• See the additional information tab for screenshots from the App

Blue Smart IP22 12V 20A 1 Bank 120V Charger – Dry Mount

The Blue Smart IP22 Charger is a professional battery charger with built-in Bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper vans.

Bluetooth Smart

The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings, and to update the charger when new features become available.

High efficiency

With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 watts, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test – bulk – absorption – recondition – float – storage

The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use

The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents electrolyte and sulfation stratification, a significant cause of early battery failure.

It also charges Li-ion batteries

Li-ion batteries are charged with a simple bulk–absorption–float algorithm.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with internal disconnect function.

NIGHT and LOW setting

When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating

Output current will reduce as the temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.

Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) Documents:

Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) Datasheet

Victron Energy Blue Smart IP22 12V 20A 1 Bank 120V Battery Charger (BPC122045102) Owners Manual