The Victron Energy Smart BMS CL 12/100 from Nomadic Supply Company is a Battery Management system for Victron lithium-iron-phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator.
The Victron Energy Smart BMS CL 12/100 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.
The dedicated alternator input provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries.
The Victron Energy Smart BMS CL 12/100 is also equipped with a remote on/off connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.
Victron Energy Smart BMS CL 12/100 for Victron LIFEPO4 Smart Batteries (BMS110022000) Documents:
Victron Energy Smart BMS CL 12/100 for Victron Energy LIFEPO4 Smart Batteries Owners Manual
Victron Energy Smart BMS CL 12/100 for Victron Energy LIFEPO4 Smart Batteries Data Sheet
Victron Energy Smart BMS CL 12/100 for Victron Energy LIFEPO4 Smart Batteries System Schematic
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to