VWD DTSPCR025-INT Internal Screen Mercedes Sprinter Rear Door Window (Passenger Side) are designed with top-grade components and have been produced to present an elegant, sleek appearance for your van. VWD utilizes a minimalistic approach to the design process avoiding large bulky handles, un-sightly hardware, or excessive framing.
GLASS – VWD DTSPCR025-INT Internal Screen Mercedes Sprinter Rear Door Window (Passenger Side) utilize Pure Grey Solar Privacy Glass while Solar Privacy Glass is the standard for Van Rear Windows color or tint level of the glass will be on par with the 3rd party brands, we carry as well as OEM windows. The difference comes with the modern pure grey technology of the glass. Pure Grey Solar Privacy glass offers a more realistic vision through the glass from the interior of the van which gives a more elegant stylish and fresh look to the glass over your standard green base solar privacy glass. With a better look through the glass, you still get excellent thermal performance with a 15% UV filter rating.
SLIDER – The sliding portion of the VWD DTSPCR025-INT Internal Screen Mercedes Sprinter Rear Door Window (Passenger Side) has been oriented to provide the best ventilation value to the van. Most feature openings on the front side while a few will have the opening on the rear portion of the window. Our sliders have been manufactured with a tight seal for excellent weather resistance even in storm conditions. (If the window you receive you feel is too tight, working the window open and closed or adding a silicone spray can alleviate the tightness quickly) The glass sliding panel has a low-profile aluminum trim handle on the backside of the glass for opening and closing while maintaining a sleek design for improved aesthetics and easy operation.
SCREEN – The screen for the VWD DTSPCR025-INT Internal Screen Mercedes Sprinter Rear Door Window (Passenger Side) independently slides open and closed from the glass slider, easily allowing for screened or un-screened opening in just a few seconds with a simple slide of the screen. The screen features a black acrylic frame for added durability if knocked into by gear, children, animals, etc. Staying in the theme of durability and longevity we use aluminum screen mesh exclusively in our sliders we find that while not impervious the aluminum mesh offers higher resistance to fabric mesh regarding tears and fraying. Lastly, one common industry issue is noisy screens we have addressed this issue by lining out the channel holding the screen with rubber keeping the screen tight and quiet while driving.
SECURITY – While van windows may not be a would-be thieves’ go-to entry point for a Van. The security of the window cannot be overlooked. While many sliders that feature both sliding windows, as well as sliding screens, have adopted a simplistic low center hinge latch, we have found vulnerabilities in other types of designs during rougher driving conditions or high vibrations. This would allow for the window to be able to be slid open from the outside often without the knowledge of the van owner. We took the simple latch design and altered the form to allow the latch to go all the way down to the tracks of the window securing the screen and glass and ensuring that there will be no false openings of the latch.
VWD DTSPCR025-INT Internal Screen Mercedes Sprinter Rear Door Window (Passenger Side) Specifications:
- Part # DTSPCR025-INT
- Manufacturer: Van Windows Direct
- Manufacturer Country: Turkey (Europe)
- Manufacturer Warranty: 1 Year
- Glass Color = Solar Privacy Glass (Pure Grey Premium Glass)
- Glass UV Rating = 15% ( Lower the percentage the better)
- Slider Opening = 14-1/4″H x 6-3/8″W
- Viewable Area = 14-1/8″ H x 17-3/4″W
|Part #||Window Position||Wheel Base|
|DTSPCR007-INT||Mercedes Sprinter Driver Side Forward||ALL|
|DTSPCR008-INT||Mercedes Sprinter Driver Side Middle||170″/170″ EXT|
|DTSPCR009-INT||Mercedes Sprinter Driver Side Rear Quarter||170″/170″ EXT|
|DTSPCR022-INT||Mercedes Sprinter Driver Side Rear Quarter||144″|
|DTSPCR025-INT||Mercedes Sprinter Driver Side Rear Cargo Door||ALL|
|DTSPCR010-INT||Mercedes Sprinter Passenger Side Sliding Door||ALL|
|DTSPCR011-INT||Mercedes Sprinter Passenger Side Middle||170″/170″ EXT|
|DTSPCR012-INT||Mercedes Sprinter Passenger Side Rear Quarter||170″/170″ EXT|
|DTSPCR023-INT||Mercedes Sprinter Passenger Side Rear Quarter||144″|
|DTSPCR024-INT||2019+ Mercedes Sprinter Passenger Side Rear Cargo Door||ALL|
Whats needed to Install?
This window is installed with Urethane Adhesive, you will need a primer base and we recommend edge molding for the cut edge.
How will I install this window?
The window uses the OEM factory metal stamping on the van. On the interior of the van you will notice an area where the inner metal ends. Here is a photo to clarify. You will cut right along that edge all the way around your van may have multiple upright you will cut those out straight with your opening.
REPLACING AN EXISTING OEM WINDOW:
If you are replacing an existing factory window that is urethane bonded, you may want to take the van to a professional for removal and replacement. If you are removing the windows on your own, the best tool to use is a wire cutter. Once the window is cut out you will need to cut the original urethane down as flat as possible and clean as much away as possible. After using any cleaning product to remove the urethane, be sure to clean it very well with rubbing alcohol.
ADDING WINDOW TO A VAN WITHOUT WINDOWS:
If you have the following tools cutting can be done on the inside with no template or mirroring of the interior stamping to the outside. (Body Saw, Air Saw, One-Handed Reciprocating Saw)
Drill hole with a bit large enough to accommodate the blade of your cutting tool. Drill within the single sheet metal section that will be cut out then work your blade down to the OEM stamp line. Follow stamp line all the way around section to produce your windows cut hole. (Any interior supports in the window sections can be cut out as they are unnecessary).
**TIP – Cut sides and bottom first leaving the top cut for last so the sheet metal does not start bending while cutting.
Once your hole has been cut, file any rough edges or high points to smooth the cut line. While most will trim and not see the raw edge the smoother and straighter the cut the better the trim will appear when it is time to place it. Once happy with the cut out and filed down smooth, you may want to prime the raw edge of metal prior to installing edge molding. While this is not a necessary step its easy and offers additional piece of mind.
If you will be using the edge molding now will be the time to install it. Window Edge Molding is not necessary for the installation of the window it will be used to offer a better appearance on the interior of the van by covering the raw cut edge. If your interior walls will be covering the cut edge than no reason to trim something that will be hidden. When ordering trim, it is sold from a bulk roll by the foot and there is a drop-down box for proper sizing for your van. Most vans will cover both inner and outer sheet metal edge with the trim. The trim on the outside will not affect the installation of the window as the urethane bead will be taller than the thickness of the trim.
**TIP – Dry fitting window prior to urethane bonding can help familiarize yourself with placement. Also, you can place securing tape/masking/painters’ tape in corners and side middle on to glass then onto body cut tape leaving on both window and van body as added line-up markers for easier placement.
URETHANE BONDING OF WINDOW:
Using a urethane primer apply to the outside of the body you want to apply close to the opening but allow a 1/2″ of gap when possible that way when the urethane is applied and spreads less likely to have urethane seeping out from the glass edge on the outside of the van. Only one line of primer is needed and only on the Van wall. Multiple lines and or Primer on the glass is unnecessary and ultimately just a waste of product. After you have painted your primer line around your cut hole allow primer to dry for about 10 minutes.
When using Automotive Urethane, a regular everyday caulking gun will not work. We recommend no less than a 12:1 Thrust Ratio (Commercial/Professional Grade) or above. We offer a 26:1 Ratio Gun in our Tools and Supplies Section.
If you order the urethane from us the tip will have an embossed cutline on the tip showing a cut across the tip as well as a v-notch this will be where you will want to cut the tip for your perfect sized urethane bead. When applying the urethane to the van the V will trail your application patch, so you end up with a pyramid looking bead.
We recommend starting a few inches down from the top rear corner of the window that way you can avoid having a joint from one tube to the next on the top or front of the window. If it happens it is not going to be a catastrophe just if it can be done where the top and front is one continues bead that reduces the risk of a leak. With larger window (Most side OEM fit window) will require a second tube of urethane when one bead end start the next about a 1/2″ into the already applied bead (smooth together with plastic putty knife/wood stick, flat screwdriver, etc…) Spraying a liberal amount of glass cleaner onto the tool will help keep the urethane from sticking to the tool and clumping.
**TIP – When applying urethane bead consistency is key to a great install thicker and thinner spots can lead to leakage.
INSTALLING WINDOW TO URETHANE:
Having two people for window placement is always nice one holds the front bottom corner the other the rear bottom corner. OEM fit windows will have about a 1/4″ gap from body line to glass get bottom edge lined up holding glass back away from wall on top at a slight angle / once you have your gap lined up at bottom and your front and rear edges are lined up where you want tilt window up and press into urethane you do not need to push too hard as the urethane has a very strong adhesion and will grab on to window quickly. Keep a hand pressing on window to keep position if all good, open hand smack the glass down following the patch of your urethane bead. Goal on modern vans with insert areas for windows will be to get the glass even with the outer body of Van the body above and below the window section so it is a fluid transition from sheet metal to glass to sheet metal again.
Once the window is in the desired location using Window securing tape, tape each corner with 3-4 strips to keep glass in place. If you plan on driving van within the first 24hrs you can also tape the edge all around to keep urethane bead clean from contaminants while traveling.