VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021)

Designed specifically for overlanding camper vans, the VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021) from Nomadic Supply Company is a complete, self-contained system with everything needed to install a high-performance onboard air source for your vehicle.

Designed to fit compact spaces, VIAIR’s Adventure Series Van Life onboard air compressors are capable of quick tire inflation and other pneumatic requirements of van adventuring and living. Efficient and budget-friendly, these kits feature a single compressor with a 1.5-gallon tank and all accessories necessary for installing a working system.

Part of VIAIR’s Adventure Series Van Life lineup, Nomad systems operate at 200 psi with a flow rate of 1.58 cfm from a 1.5-gallon tank and are powered by a 380C Stealth Black compressor. They are capable of quick tire inflation and other pneumatic tasks with all accessories necessary to have a working system in your van.

VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021) is a simple, high-pressure system that will take up very little space and handle all pneumatic requirements for your van. Powered by a 100% duty cycle 380C compressor operating at 200PSI with a flow rate of 1.58CFM and a 1.5-gallon tank, the VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021) kit provides serviceable air for cleaning your gear, recreational inflatables, and is capable of inflating van tires of virtually any size.

VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021) comes with a 30ft inside braided coil hose, gas station-style tire inflation gun, and a blow gun, as well as all the necessary components to install the system.

VIAIR Nomad Constant-Duty Onboard Air Compressor System (50021) Features:

* 380C Stealth Black VIAIR compressor with thermal overload protector
* 1.5-gallon matte black VIAIR air tank–200 psi
* Pressure switch–165 psi on, 200 psi off
* 40-amp 4-prong relay
* Moisture-resistant fuse holder
* Mechanical tire inflation gun with 160 psi gauge
* 30 ft. inside braided black coil hose with quick-connect and stud
* Rubber-tipped blow gun
* Air source relocation kit
* 1/4 in. to 1/4 in. NPT reducer
* 1/4 in. to 1/8 in. NPT reducer
* 5-piece tank port fittings kit (For 200 psi rated systems)
* VIAIR storage bag
* 12 V
* Permanent magnetic motor
* Duty cycle: 100 percent at 100 psi (55 percent at 200 psi)
* Maximum working pressure: 200 psi
* Maximum 12 V amp draw: 23 amps
* Ingress protection rating: IP67