Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) is a single component, solvent release butyl-based sealant specifically designed to provide a watertight primary seal between lapping substrates and joints. Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) is easy to apply and tool and exhibits superior adhesion to a variety of clean surfaces.
Dicor Butyl Rubber Sealant 10.1oz. tube (451BSG-1) shows excellent resistance to weathering, shrinking, and cracking. Its “gun-ability” allows for a mess-free application, forming an airtight seal and leaving a seamless finish.
Dicor’s Gunnable Butyl Sealant adheres to TPO, EPDM, PVC, glass, metals, aluminum, concrete, wood and some plastics stabilized to prevent deterioration and discoloration. This is for use on skylights, vents, windows, termination rails. The easy caulk gun applicator makes for a mess free, seamless application. The butyl sealant dries to a putty-like consistency and creates an airtight, strong seal that resists degradation.
Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) Features:
- Provides a watertight primary seal between lapping substrates and joints
- For use on skylights, vents, windows, and termination rails
- Compatible with TPO, EPDM, PVC, glass, metal, aluminum, concrete, wood, and plastics
- Easy, mess-free application
- Cures to a putty-like consistency
- Shows excellent resistance to weathering, shrinking, and cracking
- Creates an airtight, strong seal that resists degradation
- Gun-ability allows for an easy, mess-free application
- Compatible with TPO, EPDM, PVC, glass, metal, aluminum, concrete, wood, and plastic
- Color: Gray
- 10.1-oz. tube
Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) Specifications:
Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) comes in grey and is UV-resistant.
Approximate coverage per tube in linear feet:
3/8” bead – 11 ft.
1/4” bead – 24 ft.
Coverage results dependent on bead size.
Dicor Butyl Rubber Sealant 10.1oz. Tube (Gray) (451BSG-1) Installation:
Surface Preparation: Prior to application, clean surface of all dirt, loose paint, rust, oil and grease. Allow surface to dry before applying sealant.
Directions for use: Once all areas have dried, cut nozzle to desired bead size and puncture inner seal. Using a standard caulking gun, apply bead at a 45 angle using constant pressure. Use at room temperature for ease of gunning. Tool or join surfaces for sealing before material skins. Support tooled or joined surfaces for 8 hours minimum. Use mineral spirits to remove excess material before skin forms.