Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack)

Looking to light up the trail at night? Look no further. Introducing the Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) from Nomadic Supply Company! Designed for superior durability and maximum performance, our Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) has set a new standard in the offroad category. This kit includes all the wiring and hardware necessary to mount four Stage Series LED rock lights, making it easier than ever to add rock lights to your vehicle.

Multicolor plus White. With four high-intensity RGBW LED emitters, the Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) provides plenty of output in any color you can think of, paired with our RGBW remote or RGBW Bluetooth controller and app. The diffused optical feature of the lens provides excellent integration of colors. And unlike other multicolor lights, the extra white chip means that these will light up in a bright, pure white color when you want to maximize output. Want to show off? Use your controller to start a pattern, strobe, fade, or control the brightness. The best of both worlds! Our RGBW rock lights pack a punch, but if you are looking for the most output possible, check out our Diode Dynamics DD7738 Stage Series Single-Color Rock Light Installer Kit (4-pack).

Optically-Engineered Lenses. Most rock lights are built without optics in mind. They use a simple clear cover to protect from the elements. In true Diode Dynamics style, we’ve incorporated optical features to get the best performance possible. Four individual optics are molded into the outer lens, which provides excellent spread and even, consistent coverage from each light. The lens itself is a thick automotive-grade polycarbonate, made to take a beating on the trail. And the best part? The lenses are interchangeable and can be swapped out easily as needed.

Mount it Your Way. Our Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) can be mounted using the center bolt mounting point that is neatly hidden underneath the lens and comes standard, or you can select the magnet mount option. Our magnet mounts feature an over-molded design that keeps your rock light secure using the integrated mounting hole. With N42 magnets providing an approximate pull/holding force of 35 lbs, you can rest assured that the magnet won’t go anywhere!

Simple Connections. For maximum convenience, our Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack)include a waterproof M8 barrel-style connector with a 10-inch lead. This provides a secure, waterproof connection and is compatible with the included plug-and-play harnesses. At only 8mm in diameter, it’s still easy to route the wires to where you need them.

Proven Reliability. We know your rock lights will be put to the test, so you can rest assured that they have been designed for superior durability. They are IP68 waterproof rated and feature a cast aluminum housing and pin-fin heatsink, for effective thermal dissipation. The lens is designed with thick automotive-grade polycarbonate and a UV coating. Backed by a limited 8-year warranty, they have been tested in-house from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. Rest assured, the Stage Series Rock Lights will handle whatever you throw at them.

Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. No matter what you’re driving, we pride ourselves in offering only the best possible LED solutions. Please contact us if you’d like to discuss your lighting project!

Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) Features:

• High-power RGBW LED function.
• Convenient center-mount or magnet-mount installation.
• Control with remote or Bluetooth app.
• Includes all necessary wiring and mounting hardware.
• Aluminum heatsink with signature Ico Bezel shape.
• Thick, durable lenses, engineered to spread light.
• Engineered and Assembled in USA.

Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) Includes:

• Four (4) Stage Series RGBW Rock Lights
• Four (4) Rock Light Hardware Kits
• One (1) Rock Light RGBW Wiring Harness
• One (1) 1M Extenstion
• One (1) 3M Extension
• Two (2) 5M Extensions
• Twelve (12) Zip Ties
• Installation guide

Diode Dynamics DD7740 Stage Series RGBW LED Rock Light Installer Kit (4-pack) Specifications:

NOTE: The output data below is for the White color option.

• Measured Lumens: 75 lm
• Intensity (cd): 30 cd
• Color Temp (CCT): 6800K
• Beam Angle: Round, 60°
• Power (watts): 4.8
• Operating Voltage: 9-16V
• Current (amps @ 13.2V): 0.36
• Wire Size: 28AWG
• Polarity: Polarity Specific
• Operating Temperature: -40C to 85C (-40F to 185F)
• LED Emitter: Lumileds Z ES
• Connector(s): M8 Input
• Driver Features: Linear Regulated
• Materials: UV Coated Polycarbonate Lens, Powdercoated Aluminum
• Cooling: Passive, Pin-Fin heatsink
• Compliance Ratings: SAE J575 Durability Test
• Intrusion Ratings: IP68 Waterproof
• Shipped Weight (lb): 3.2

How To Mount Your Rock Light

Step 1 – Identify Mounting Location
Identify the location you would like to mount your Stage Series Rock Lights.

Step 2 – Prepare Rock Light for Mounting
Remove the outer lens from your rock light, then remove the center rubber dust seal.

Step 3 – Drill Mounting Hole
To mount the rock light using the center hole option, drill a hole using a 7/32″ or 15/64″ bit in your desired location.

Step 4 – Drill Wire Hole
If you would like to hide the wiring, line up the light over the hole you just drilled and drill an additional 3/8″ hole in the appropriate location to run the wire through your mounting surface. Otherwise, pull the wiring to the side.

Step 5 – Mount Rock Light
Use the included nut, bolt, and washers to mount the light as shown in the diagram below.

Step 6 – Mount with Zip Ties (Optional)
You may alternatively use zip ties for mounting the rock light to any available attachment point, with integrated tabs on each side of the light.

Step 7 – Reassemble Rock Light
Reinstall the rubber dust seal and clip the lens into position.

Wiring Instructions

Step 8 – Route Switch Wiring
Determine a suitable location to mount the switch, near the battery or main power terminal. Route the switch wiring to that location.

Step 9 – Connect to Battery
Connect the red power input wire to the positive battery/power terminal. Connect the black ground wire to the negative battery terminal or a factory grounding point.

Step 10 – Select Switch Location
Determine a suitable location to mount the switch in the cabin of the vehicle.

Route the switch wiring to that location. This may require going through the vehicle firewall. We recommend following the path of the factory wiring harness, and unplugging the switch while routing the wires.

Step 11 – Mount the Switch
Drill a 3/4″ hole and mount the switch. Reconnect wires to switch.

NOTE: The gold spade on the switch should be connected to the black (ground) wire.

Step 12 – Route the Extension Wires
Identify the extension and splitter wires (included with 8-pack kits) included in your kit. Depending on the kit you ordered, you will have 3M and 5M extension wires. Route the extension wires to each LED, avoiding any moving parts or direct contact with heat sources. Following the factory wire loom is the best practice.

See the diagrams below for the most common way to wire the kit. Plug the output connector into the LED.

Rock Light Single Color Wiring Diagram – 4 Pack

Rock Light Single Color Wiring Diagram – 4 Pack + 1M Extension

Rock Light Single Color Wiring Diagram – 4 Pack + 2 Pack Add-On

Rock Light Single Color Wiring Diagram – 8 Pack

Rock Light RGBW Wiring Diagram – 4 Pack

Rock Light RGBW Wiring Diagram – 4 Pack + 1M Extension

Rock Light RGBW Wiring Diagram – 4 Pack + 2 Pack Add-On

Rock Light RGBW Wiring Diagram – 8 Pack

Step 13 – Reconnect Battery
Reconnect the negative battery terminal, test thoroughly, and aim the LED appropriately based on use. Secure any excess or loose wiring. Please check your local laws and regulations regarding aiming, installation, and restrictions for on-road use, as applicable.