Skip to content

Front Runner Outfitters Low-Roof Mercedes Sprinter 144″ Slimpro Roof Rack

$1,594.00

Nomadic Supply Company donates 10% of profits to Sierra Club and 1% of gross sales to the Stripe Climate Change initiative.

Unlock your Mercedes Benz Sprinter van’s storage potential with this highly versatile, rugged, Front Runner Outfitters Low-Roof Mercedes Sprinter 144″ Slimpro Roof Rack from Nomadic Supply Company.

Product Questions & Reviews
GTIN: 6009542221328 SKU: v Category:

Unlock your Mercedes Benz Sprinter van’s storage potential with this highly versatile, rugged, Front Runner Outfitters Low-Roof Mercedes Sprinter 144″ Slimpro Roof Rack from Nomadic Supply Company.

Long distance van-life missions, weekend trips, or hauling equipment such as ladders and pipes, the low-profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights, and air vents. The rack’s expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.

Front Runner Outfitters Low-Roof Mercedes Sprinter 144″ Slimpro Roof Rack Features:

  • Compatible with Mercedes Benz Sprinter L1/H1 / 128″SWB standard roof vans with a vehicle length of 5267mm / 207.4″.
  • Load-carrying area: 2570mmL (101.2″) x 1528mmW (60.2″).
  • Eight (8) Mounting Feet secure into the van’s existing factory mounting points.
  • Included Slat Bracket can be inverted for a lower profile at 85mm (3.4″) height, or left in standard configuration at 127mm (5″).
  • Compatible with most Front Runner side mount accessories.
  • Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
  • The fitment guide and all mounting hardware are included. No drilling or modification is required.
  • All Front Runner racks are backed by a limited lifetime warranty.*

Front Runner Outfitters Low-Roof Mercedes Sprinter 144″ Slimpro Roof Rack Specifications:

KVMS001T – Mercedes Benz Sprinter (L1H1/128″ SWB/Standard Roof) (2007-Current) Slimpro Van Rack Kit – by Front Runner

Consisting of:
4x FAVF004 – Mercedes Sprinter Van Rack Foot Set
1x RRAC207 – Van Rack Joiner Kit
2x RRAC208 – Van Rack Side Profile End Caps
2x RRAC940 – Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1425 – Narrow Slat / 1425mm (Pair)
1x SPVT001 – Van Rack Side Profile / 1156mm
1x SPVT002 – Van Rack Side Profile / 1358mm
1x WDST013 – Wind Deflector Van Rack 30mm Lip

Material Used:
Black epoxy powder – coated T6 aluminium
High strength steel

Assembled Rack Kit Dimensions:
2570mm (101.2″) L x 1528mm (60.2″) W x 143mm (5.6″) H

Approximate Installed Weight: 15.1kg (33.29lbs)

Shipping Dimensions:
Width: 440mm (17″)
Length: 1720mm (68″)
Height: 160mm (6″)

Shipping Weight:
Weight: 37kg (81lbs)

Front Runner Outfitters Mercedes Benz Sprinter 144″ Slimpro Roof Rack Documents:

Front Runner Outfitters Mercedes Benz Sprinter 144″ Slimpro Roof Rack Owners Manual

Brand

Front Runner Outfitters

Legend has it that Front Runner was conceived between a 1988 Land Cruiser 70 and a 1992 Mercedes G-Wagen in Botswana, around a campfire, near a majestic Baobab, amongst elephant tracks, by a handful of friends from South Africa with backgrounds in engineering, design, manufacturing and off-road racing. After suffering through numerous equipment failures on their expeditions around the world, they decided to take their shared passion for vehicle based adventure travel and dream up new, smart gear and build it stronger than… well, as they put it, “stronger than the elephants at the watering hole 1 klick over.” And just like that, before the moon gave way to the sun, we were born. With the gruelling African bush as a testing ground, we at Front Runner focused on a tough love approach to developing products. With both feet facing the future and little sentimentally for mediocre ideas of the past – common approaches to off-road vehicle product design were quickly jettisoned in favor of innovation, new materials, and superior manufacturing practices. Today our products have a well deserved reputation (if we don’t say so ourselves) for quality, intelligent design, and durability. Our manufacturing facility just outside of Johannesburg, South Africa features in house laser cutting, bending and powder coating. Our CAD designed products by a team of engineers and built by skilled craftsman in our ISO-9001 : 2015 Certified factory. Our roof racks, water tanks, tents, awnings, drawer systems and camping accessories are enjoyed, used and abused around the world by casual campers, the U.N., overlanders, NGOs, outdoor enthusiasts and extreme athletes. That's our origin story. Share it with your friends and family. Around a campfire. And for full effect, make sure you’re sitting in our chairs, by our tents, with our roof racks on your vehicles.
WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Join the Waiting List We will automatically inform you when this product is back in stock via email, text message, or both! Please enter your contact info below.