The Method 707 Bead Grip Wheels for Mercedes Sprinter Vans from Nomadic Supply Company brings the rally inspired design of the 407 UTV Bead Grip to the Sprinter van off road wheel market. Available in Mercedes Sprinter specific fitments in both Bahia Blue and Matte Black incorporating the Method exclusive Bead Grip technology for unrivaled tire security at lower pressures.
The Method 707 Bead Grip Wheels for Mercedes Sprinter Vans boasts a solid A356 aluminum construction with T6 heat treatment and ultra strong 1,850-3,640 lb load ratings.
Patented Bead Grip technology integrates grooves, found on both the inner and outer bead seat, to engage the tire bead for a stronger hold under extreme side load and lower air pressures. The Method 707 Bead Grip Wheels for Mercedes Sprinter Vans ‘safety hump’ also gets a more aggressive profile which further stabilizes the tire bead in the seat for increased security. This allows the user to run lower tire pressures that would have previously required bead locks while saving weighing and remaining street legal.
BEAD GRIP: HIGHER GRIP AT LOWER PRESSURE. ONLY FROM METHOD.
WHAT IT IS:
Patented Bead Grip technology aims to be the bridge between a conventional street wheel and a beadlock, which is often not legal for highway use. Reducing air pressure in the tire increases traction and ride quality while on the trail. The ability to safely run lower pressures without having to worry about the tire de-beading along with DOT approval will undoubtedly be a bonus to off-road enthusiasts.
WHY IT’S OFF-ROAD PROVEN:
The integrated Bead Grip grooves, found on both the inner and outer bead seat, engage the tire bead for a stronger hold under extreme side load and lower air pressures. The wheel’s ‘safety hump’ also gets a more aggressive profile which further stabilizes the tire bead in the seat.
Method 707 Bead Grip Wheels for Mercedes Sprinter Vans Colors:
MR70777563550 Matte Black
MR70777563650 Bahia Blue
Method 707 Bead Grip Wheels for Mercedes Sprinter VansFeatures:
- Patented Bead Grip® technology engages tire bead for increased grip at low tire pressures
- Solid A356 aluminum with T6 heat treatment construction
- Iconic rally inspired multi-spoke design with debossed METHOD logo on outer lip
- Aggressive safety hump on bead seats further prevents de-beading
- Reinforced inner lip taken from MRW race wheel increases strength
- Snap-in center cap with embossed METHOD Bead Grip® logo.
- Push through center cap with embossed METHOD Bead Grip® logo for 8 lug applications
- Hub centric fitments for common applications
- Industry’s best lifetime structural warranty
- Strong 1850 lbs. to 3640 lbs. load ratings
Method 707 Bead Grip Wheels for Mercedes Sprinter Vans Specifications:
- Load Rating: 3640 lbs
- Wheel Offset: 50 mm
- Size: 17″ x 7.5″
- Bolt Pattern: 6×130
- Vehicle Fit: NCV3 Sprinter 2500 2wd, NCV3 Sprinter 2500 4×4, VS30 Sprinter 2500 2wd, VS30 Sprinter 2500 4×4
- Back Spacing: 6.200
- Bore: 84.1
- Weight: 26.5 lbs
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to