Measuring at 35.4 inches by 11.8 inches, the Tec Vanlife Universal Camper Van Slider Bunk Window (35.4″ x 11.8″) from Nomadic Supply Company is the ideal choice for a bunk window in your van. Its dimensions ensure a seamless fit, providing a sleek and stylish addition to your van’s interior.
The Tec Vanlife Universal Camper Van Slider Bunk Window (35.4″ x 11.8″) tinted glass not only adds a touch of sophistication but also offers privacy and protection from harsh sunlight. When closed, the slider part sits flush, creating a clean and streamlined look that enhances both the aesthetics and performance of your van.
Designed to provide maximum protection against harsh weather conditions and drafts, our Tec Vanlife Universal Camper Van Slider Bunk Window (35.4″ x 11.8″) features insect screens and high-quality rubber seals. The bug screens offer complete protection from pests, ensuring your space remains comfortable and bug-free.
Crafted with utmost quality and durability, the Tec Vanlife Universal Camper Van Slider Bunk Window (35.4″ x 11.8″) is built to withstand the rigors of van life. Its robust construction ensures long-lasting performance, making it a reliable and practical choice for any van enthusiast.
With a full 1-year manufacturer’s warranty, you can trust that our Nomadic Universal Camper Van Slider Bunk Window (35.4″ x 11.8″) is built to last, giving you complete peace of mind.
Tec Vanlife Universal Camper Van Awning Bunk Window Installation:
Prepare the window frame and mark the cutout line.
Remove the rubber gasket from the window frame, ensuring a clean surface for adhesion. Position the window on the wall and draw the cutout line. Cut the opening using an air jig saw (recommended).
Apply the adhesive:
Apply windshield urethane adhesive along the inner edge of the window frame.
Ensure sufficient adhesive is applied for a strong bond. Use duct tape to cover the surrounding cutout area, allowing the excess adhesive to be removed with the tape.
Position the window:
Carefully place the window frame into the cutout. Press the window firmly against the wall, ensuring proper contact with the adhesive.
Secure the window:
Use temporary supports or tape to hold the window in place while the adhesive cures, following the manufacturer’s recommendations.
Clean up:
Use a paper towel or lacquer thinner to wipe away any excess adhesive that may have squeezed out from the edges of the window frame.
Allow curing time:
Leave the window undisturbed for the recommended curing time specified by the adhesive manufacturer.
Test the installation:
Once the adhesive has fully cured, check the window for stability and proper sealing, ensuring no gaps or leaks around the edges.
For wall thickness between 6mm-19mm:
Position the window on the wall and draw the cutout line. Cut the opening using an air jig saw (recommended).
Cut wood shims to the required thickness to fill the gap between the window’s inner frame and the wall. Insert the wood shims between the window’s inner frame and the wall, adjusting for a snug fit.
Use the trim ring:
Install the window inner trim to clamp the window against the wall securely.
For wall thickness between 20mm-29mm:
Position the window on the wall and mark the cutout line.
Cut the opening using an air jig saw (recommended).
Carefully place the window frame into the opening
Install the window inner trim to clamp the window against the wall securely.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to