Skip to content

NWC 24-Gallon Ford Transit Spare Tire Basket Water Tank (TR-ST-24)

$339.00

Nomadic Supply Company donates 10% of profits to Sierra Club and 1% of gross sales to the Stripe Climate Change initiative.

Relocate your Ford Transit spare tire from under the van to the rear door of your van and then you can free up the spare tire basket for 28 gallons of fresh water storage with the Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) from Nomadic Supply Company! Our 24-Gallon Spare Tire Basket Water Tank sits perfectly inside your factory Ford Transit tire basket under the back of the van.

Product Questions & Reviews

Relocate your Ford Transit spare tire from under the van to the rear door of your van and then you can free up the spare tire basket for 28 gallons of fresh water storage with the Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) from Nomadic Supply Company! Our 24-Gallon Spare Tire Basket Water Tank sits perfectly inside your factory Ford Transit tire basket under the back of the van.

The Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) tank accepts 1/2″ (black plugs) and 1-1/2″ (need to be drilled) NPT fittings.

The Northwest Conversions Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) can be filled by gravity feed or hose using our fill kit. To transfer water from the tank you’ll need a water pump or to plumb it into a system with the ability to siphon.

The Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) is designed to fit the factory location using only the factory hardware and holder.  No other hardware is needed.  Tank fits Ford Transit 2500 2007-present and Winnebago Revel.

This water tank is designed and fabricated by our friends at Northwest Conversions in Bellingham, Washington. Please allow 1 week for shipping as they are a one-man operation. Northwest Conversions will not ship water tanks to Canada.

All Northwest Conversions Camper Van Water Tanks are TEI Tested & RVIA Approved!

All Northwest Conversions Camper Van Water Tanks are TEI Tested & RVIA Approved

The RV Industry Association (RVIA) has adopted standards for the construction of RVs, including those falling under the ANSI, NEC, NFPA, and other national accreditation associations. Products are tested and verified by independent listing agencies – in this case, Testing Engineers International (TEI). This guarantees that member manufacturers such as Northwest Conversions build their products to conform to standards based on safety and quality, but also ethical and sustainable business practices and community engagement.

Purchasing your Northwest Conversions camper van water tanks from Nomadic Supply Company means that you’ll receive products you can depend on. Designed and built in the US according to the highest standards in the industry, Northwest Conversions provides the parts you need while helping to provide greater opportunities for safely exploring our wild lands now and in the future.

Ford Transit 24-Gallon Spare Tire Basket Water Tank (TR-ST-24) Features:

  • Water Tank has a 24-gallon capacity
  • Water Tank accepts 1/2″ plugs and 1-1/2″ NPT fittings
  • The water Tank Fits the Ford Transit Factory Spare tire location.  No extra hardware is required.
  • Water Tank can be used for fresh or grey water
  • Water Tank is Made in the USA
  • Water tanks are made from BPA Free Food Grade Plastic
  • Overall dimensions are 28″ x 30″ x 9.75″
  • The tank has (2) 1/2″ NPT and (2) 1.5″ NPT ports on driver’s side
  • The tank has (1) 1/2 NPT and (1) 1.5″ NPT port on top that can be used for float sensor or vent.
  • Tank is designed to NOT be Pressurised (I.e. Needs to be vented)
  • 1/2″ mounting hardware and plates included

How to Install Our Camper Van Water Tanks:

The first step is to always orient the water tank so that our logo, NW Conversions, is facing up, on the top of the tank. The top of the water tank will also always have a 1.5-inch water level sensor location or water fill port. All of the water tank ports are 1.5″ and .5″. The .5″ ports will be provided with plugs in them. Use a 3/8″ T-handle Allen key tool to remove the plugs. Reinstall the plugs in unwanted ports along with using the plumber’s tape to seal the threads.

The 1.5″ ports have a membrane that is water-tight. To remove this membrane use a 1 3/4″ hole saw that is slightly smaller than the threads to drill your desired 1.5″ ports out. Make sure to clean all loose plastic particles out of the tank before installing the fittings. This is easiest to do with an air compressor or vacuum. Once again, use the plumber’s tape or pipe sealant on all fittings.

How to Clean Our Camper Van Water Tanks:

Make sure you rinse the water tank before first use, as there can be plastic bits left in the tank from the manufacturing process.

Nomadic Supply Company recommends using our Lippert Floë Compressed Air Camper Van Fresh Water Flushing System throughout the year to keep your water system completely pristine. In addition to flushing your water system you can also use bleach or vinegar to clean our fresh water tanks, or you can one of our camper van fresh water tank cleaning solutions. To clean your tank with bleach or vinegar follow the instructions below.

Step 1: Drain the water tank completely

Step 2: Mix 4 oz bleach or vinegar with 1 1⁄2 gallons of hot water

Step 3: Pour bleach/vinegar solution into tank

Step 4: Fill tank with fresh water until its full

Step 5: Let sit for 12 hours

Step 6: Drain the water tank completely, refill with fresh water and drain completely again (you may need to repeat this rinse step a few times)

Camper Van Water Tank Venting:

Polyethylene camper van water tanks must be vented. These fresh water tanks are not designed to handle pressure or a vacuum. A vent is necessary because as the tank is filled or emptied of its liquid an equal proportion of air must be displaced simultaneously. Discharge of a water tank without a vent would cause a vacuum to occur. A generally accepted rule concerning vent size is that it should be the same size as the tank’s largest outlet.

Brand

Northwest Conversions

Northwest Conversions water tanks are designed and fabricated by our friend Tyler at Northwest Conversions in Bellingham, Washington.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You may also need these:

WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Join the Waiting List We will automatically inform you when this product is back in stock via email, text message, or both! Please enter your contact info below.