Skip to content

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001)

$159.99

10% of profits donated to Sierra Club and 1% of all sales donated to Stripe Climate Change initiative.

Lonseal ZAD4001 Vertical Surface Contact Adhesive is formulated for high performance installation of Lonseal flooring on floors in Mercedes Sprinter camper vans, tiny homes, and yachts. Lonseal ZAD4001 Vertical Surface Contact Adhesive is a high-strength nitrile rubber-based contact adhesive for forming an instant bond between Lonseal flooring and vertical surfaces of trucks, trailers, vans and more. Formulated for spray, roller or brush application, this fast drying contact adhesive forms an instant bond. Lonseal ZAD4001 Vertical Surface Contact Adhesive has a high initial tack, and is highly resistant to water, acids, alkalis, oil, gasoline, and most solvents when fully cured.

This product is hazardous and it is illegal to ship it via any method other than Ground.

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001) is formulated for high performance installation of Lonseal flooring on floors in Mercedes Sprinter camper vans, tiny homes, and yachts. Lonseal ZAD4001 Vertical Surface Contact Adhesive is a high-strength nitrile rubber-based contact adhesive for forming an instant bond between Lonseal flooring and vertical surfaces of trucks, trailers, vans and more. Formulated for spray, roller or brush application, this fast drying contact adhesive forms an instant bond. Lonseal ZAD4001 Vertical Surface Contact Adhesive has a high initial tack, and is highly resistant to water, acids, alkalis, oil, gasoline, and most solvents when fully cured.

Lonseal ZAD4001 Vertical Surface Contact Adhesive is an Official Nomadic Supply Company Product that we use on our own Mercedes Sprinter vans!

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001)Features:

  • Size: 1 Gallon
  • Weight: 7lbs/gal
  • Shelf life: 6 months unopened
  • Application: Spray, Brush or Roller
  • Ideal storage temperature: 65 °F – 85 °F
  • Ideal application temperature: 65 °F – 85 °F

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001)Application:

  • Apply per label instructions.
  • Uniformly coat both surfaces after they are thoroughly cleaned and free of oil, dirt or grease
  • Allow adhesive to become tacky to the touch, then join substrates and allow drying
  • Depending on surface porosity and method of application
  • Approx. spread rate: 150 -200 square feet of coverage per gallon
  • Open time: 3 – 15 minutes
  • Working time: 0 minutes**

OPEN TIME: Waiting time required before placing the flooring material into the adhesive.

WORKING TIME: Amount of time for the adhesive to accept the flooring material after being applied to the substrate.

**Due to the high initial tack of the #400, once the material is placed into the adhesive after allowing for adequate open time, it will not be able to be repositioned.

Lonseal ZAD4001 Vertical Surface Contact Adhesive Application:

Size 1 Gallon
Weight 7 lbs/gal
Shelf Life 6 Months (Unopened)
Application Spray, Brush or Roller
Ideal Storage Temperature 65 °F – 85 °F
Ideal Application Temperature 65 °F – 85 °F

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001) Information:

Lonseal Vehicle Application Guide

Lonseal #400 Vertical Surface Contact Adhesive (ZAD4001) Data Sheet

Weight 8 lbs
Dimensions 13 × 13 × 15 in
Size

Half Gallon, 1 Gallon

Brand

Lonseal

For over 49 years, Lonseal products have been at the cutting-edge of innovative marine flooring design. Lonseal products provide clients with finishes that are as economical as they are exhilarating. With an unparalleled range of striking sound-dampening and cushioned-step surfaces – and unrivaled dimensional patterns that have proven themselves in countless installations – Lonseal offers a surface solution to all vehicle flooring needs.

Don't miss out on these...

WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.