The Nomadic IP68 Waterproof Camper Van Solar Wire Entry Gland/Cable Seal/Pass-Through from Nomadic Supply Company is an ideal solution for camper van roof cable entry. Made from ABS plastic, our waterproof & UV-resistant housing provides an easy cable entry solution.
Nomadic IP68 Waterproof Camper Van Solar Wire Entry Gland/Cable Seal/Pass-Through Features:
- Great for running wires through a rooftop flat surface in a solar system setup with no leaks.For a neater, safer installation.
- Made from ABS offering high impact, heat resistance, and weather resistance.
- Suitable for use with cables in the range of 2 mm² -6 mm² (14 AWG – 10 AWG)
- Cable glands are used to secure, fix and route electrical cables to the installation in the positions.
- Used to create a tight and watertight seal around the cable, preventing the entry of dust, moisture, or other contaminants.
- IP68 waterproof rating.
- Used double-sided waterproof tape or some Dicor or Sikaflex or self-tapping screws to hold it down.
- Make a gasket to prevent water from entering along the base.
Nomadic IP68 Waterproof Camper Van Solar Wire Entry Gland/Cable Seal/Pass-Through Specifications:
Size:
5.12” L x 3.74” W x 1.57” H
Cable Gland Diameter Range:
2 mm² -6 mm² (14 AWG – 10 AWG)
IP Rating:
IP68
Material:
UV resistant ABS
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to