Skip to content

SikaFlex P2G Urethane Automotive Window Adhesive & Primer Kit

$38.50

10% of profits donated to Sierra Club and 1% of all sales donated to Stripe Climate Change initiative.

Our SikaFlex P2G Urethane Automotive Window Adhesive & Primer Kit Includes:
2 – SikaFlex P2G Urethane Automotive Window Adhesive
1 – Single Application Primer

This product is hazardous and it is illegal to ship it via any method other than Ground.

Our SikaFlex P2G Urethane Automotive Window Adhesive & Primer Kit Includes:

2 – SikaFlex P2G Urethane Automotive Window Adhesive

1 – Single Application Primer

SikaFlex P2G Urethane Automotive Window Adhesive can be used primer-less on Windshields but we strongly recommend using a primer on any vehicle side windows & rear door windows. Unlike windshields, side windows & rear cargo door windows are vertical, so the primer will make for a quicker bond to the vehicle for safer installation.

Single Application Primer acts as the base layer on your van wall to ensure proper adhesion of the urethane. Single Application Primer is a solvent-based black primer, which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.

Primer is formulated for the treatment of bond faces prior to the application of of Automotive Polyurethanes. This primer might provide excellent adhesion without previous activation steps on many substrates. Primer fluoresces under long-wave UV light for a limited period of time. This feature is used for in-process control.

  • Enhanced adhesion on a wide variety of substrates
  • Visible under UV light
  • Easy to use

SikaFlex P2G Urethane Automotive Window Adhesive is a primerless to glass, one component, cold-applied, fast curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass parts. When used as directed, Sikaflex® P2G is an appropriate adhesive for use in auto glass replacement.

Sikaflex P2G has been specifically designed for the Automotive Glass Replacement business. It is ideal for mobile and in-shop installations. This product is to be used by professional, experienced users only. Related process information in this PDS is specifically for Automotive Glass Replacement. For other applications, tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

SikaFlex P2G Urethane Automotive Window Adhesive Advantages:

  • Primerless to glass
  • 6 Hour Minimum Drive Away Time (MDAT); tested according to FMVSS 212
  • Short cut-off string
  • Cost effective

SikaFlex P2G Urethane Automotive Window Adhesive Advantages:

Chemical base 1 component polyurethane
Color (CQP001-1) Black
Cure mechanism Moisture-curing
Density (uncured) 1.3 kg/l
Non-sag properties Excellent
Application temperature Product

Ambient

Substrate

 

 

10 – 35 °C (50 – 95 °F)

4 – 43 °C (40 – 110 °F)

4 – 54 °C (40 – 130 °F)

Skin time (CQP019-1) 30 minutes A
Open time (CQP526-1) 15 minutes A
Shore A hardness (CQP023-1 / ISO 48-4) 65
Tensile strength (CQP036-1 / ISO 527) 5 MPa (750 psi)

 

 

Elongation at break (CQP036-1 / ISO 527) 400 %
Tensile lap-shear strength (CQP046-1 / ISO 4587) 3 MPa (400 psi)

 

Minimum Drive Away Time (cars) according FMVSS 212 (CQP511-1) See Table 1
Service temperature (CQP509-1 / CQP513-1) -40 – 93 °C (-40 – 200 °F)
Shelf life (CQP016-1) 9 months B
CQP = Corporate Quality Procedure A) 23 °C (73 °F) / 50 % r.h. B) Stored below 25 °C (77 °F)

SikaFlex P2G Urethane Automotive Window Adhesive Surface Preparation

Surfaces must be clean, sound, dry and free from all traces of traditional and non-traditional contamination. All corrosion must be removed and all bare metal scrapes and scratches must be prepared in accordance with Sika’s Corrosion Treatment recommendations. For preparation of all bonding surfaces it is required to read and understand the instructions given in the Sika AGR Technician Training Manual. Windshields without ceramic coating need proper UV protection.

SikaFlex P2G Urethane Automotive Window Adhesive Application Instructions:

Cut off the tip of the nozzle in accordance with the vehicle manufacturer’s recommendations and screw onto the cartridge or the unipack adapter.

It is recommended to apply the adhesive with a piston-type application gun. To ensure a uniform thickness of adhesive bead, we recommend that the adhesive be applied in the form of a triangular bead (see fig. 1).

01-en-triangular-bead-oval-1000

 

Figure 1: Compressing adhesive bead to final size

SikaFlex P2G Urethane Automotive Window Adhesive Removal

Uncured Sikaflex® P2G may be removed from tools and equipment with Sika® Remover-208 or another suitable solvent, such as mineral spirits. Once cured, the material can only be removed mechanically.

Hands and exposed skin have to be washed immediately using a suitable industrial hand cleaner and water.

Do not use solvents on skin.

SikaFlex P2G Urethane Automotive Window Adhesive Application Limits

  • Avoid contact with alcohol and alcohol containing solvents during cure.
  • Do not apply over silicones or in the presence of curing silicones.
  • Glass parts must always be installed within the open time. The open time is significantly shorter in hot and humid climates. Never install any glass part after the product has built a skin.

SikaFlex P2G Urethane Automotive Window Adhesive Brochure

Weight 2 lbs
Dimensions 12 × 2 × 2 in

Brand

Sika

Sika Corporation, based in Lyndhurst, NJ, is a leading supplier of specialty chemical products and industrial materials serving construction and industrial markets including transportation, marine, and automotive. Its technologies are focused on sealing, bonding, damping, reinforcing and protecting. Sika Products are used in a wide array of applications and always fulfill the highest quality standards.
WarningWARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.