The TailGater Tire Table Aluminum Camping Table (Standard) from Nomadic Supply Company is a unique portable camping table that mounts to your vehicle’s tire and uses a single leg to provide added stability by either supporting the table vertically from the ground or in a triangular fashion off the vehicle’s tire or wheel. This design allows the TailGater Tire Table Aluminum Camping Table (Standard) to be used in a variety of terrain conditions, such as sand, snow, mud, and other soft or unlevel ground.
Self-supporting camping tables have their benefits, but if you’re car camping, truck camping, or overlapping, the TailGater Tire Table Aluminum Camping Table (Standard)’s ability to remain functional in a variety of mixed terrain conditions is truly a game-changer. The Tire Table makes a great workbench for trail repairs while off-roading and offers a ton of prep space for cooking meals.
TailGater Tire Table Aluminum Camping Table (Standard) Features:
- Weighs just under 13 pounds
- Easily holds 50 pounds
- Stable and level regardless of the ground conditions
- Retractable leg for extra support. Use straight or angled towards the tire/rim
- Will fit a 25″ tall tire up to a 40″ tall tire
- The rear slider opens up enough to fit a 15 1/2″ width tire
- The rear slider can be flipped over to get a better grip on the rear of the tire
- The rear slider & back of the table must engage the tire for a snug fit
- If your fender is extremely close to the tire, it may not fit
- No tools or hitch is required for installation. Installs within seconds
- 23″ W x 29″ L x 1.5″ high (add an additional 1.5″ high for the rear slider)
- Powder coated finish
- All parts are included and are stored on the table, including t-bolts
- Not meant to be used as a seat or a step
TailGater Tire Table Aluminum Camping Table (Standard) Specifications:
- Materials: Powder Coated Aircraft Grade 6061 Aluminum or Steel
- Dimensions: Standard – 29” L x 23 W x 1.5” H, Large – 33.5” L x 28” W x 1.5” H
- Weight: 5.5 – 8 lbs (aluminum models) or 13 – 16 lbs (steel models)
- Capacity: 50 lbs (standard size) or 75lbs (large size)
- Compatibility: Fits Tire Sizes 14” and up (for tire sizes above 35” the large version may be preferable)
- Setup Time: <1 minute to install to your vehicle’s tire
- Self Contained (all components collapse or stored in the table when not in use)
TailGater Tire Table Models:
- TailGater Tire Table Steel Camping Table (Standard)
- TailGater Tire Table Steel Camping Table (Large)
- TailGater Tire Table Aluminum Camping Table (Standard)
- TailGater Tire Table Aluminum Camping Table (Large)
TailGater Tire Table Aluminum Camping Table (Standard) Setup:
- Loosen the two knobs that hold the extendable tire clamp in place. Slide the clamp out and over your vehicle’s tire. For added support, you can remove the U-shaped tire clamp and turn it around so that the opening is facing the tire.
- Tighten the knobs to secure the tire clamp tightly against the back of the tire, sandwiching the tire between the clamp and the short tire support legs.
- Release the primary support leg and lower it down. You can either extend the leg to the ground or to your vehicle’s tire to form a triangular support for the Tire Table. Tighten the knob to secure the primary support leg.
Tips:
- Be careful not to over-tighten the knobs, especially on the aluminum model. This can damage the knobs, threads, powder-coating, and/or aluminum supports.
- Double-check that all knobs are secure before placing anything on the Tire Table.
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to