The brand new VWD AW3310 Universal Camper Van Bunk Awning Window from Nomadic Supply Company is the perfect window for above camper van beds because it allows ventilation inside your van even when it’s raining outside.
Nomadic Supply Company recommends the VWD AW3310 Universal Camper Van Bunk Awning Window over CRL VW1033 bunk windows because the VWD AW3310 has a better rubber outer seal, a better rubber main seal, a better screen, and a much better warranty. Our VWD AW3310 window has a UV-coated 3M weather seal, this provides better protection from dry rot and the elements of the standard sponge CRL uses. A thicker rubber trim is utilized on the Overlander offering a cleaner non-wavy appearance and better seal from debris and wind. Our VWD AW3310 has a 1 Year Warranty, and CRL offers a 30 Day Warranty. The VWD AW3310 has a better UV filter at 17% allowable vs 28% allowable.
The VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″) utilizes a flat glass design for simple and easy installation. CRL AW1033 windows have tinted solar glass, a removable screen, and a black powder-coated frame. The CRL AW1033 window has silk-screened black faded edges with solar privacy glass that goes right to the black powder-coated finish edge.
The VWD AW3310 Universal Camper Van Bunk Awning Window is a tilt-out awning camper van bunk window that offers excellent ventilation. The VWD AW3310 Universal Camper Van Bunk Awning Window is an easy-to-install flat awning crank-out window that features a removable screen and measures 34-3/4″ long and 11-3/4″ tall.
The VWD AW3310 Universal Camper Van Bunk Awning Window is crafted with solar privacy glass and features an upgraded 3M branded UV coated Foam seal for increased longevity and a more reliable weather-tight seal compared to competitive models.
This is an Official Nomadic Supply Company Product that we use to build our Mercedes Sprinter camper vans.
The VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″) has rounded corners, so the opening should not be cut prior to receipt of the actual product.
The VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″) tilts out 2-1/4″ allowing air to flow through the 31-1/4″ x 8-1/4″ opening allowing some of the best ventilation for a bunk window in camper vans.
VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″) Specifications:
- Universal Fit
- Color = Solar Privacy Glass
- UV Rating = 17%
- Installation Type = Clamp Ring
- Mfg Country = China
- Mfg Warranty = 1 Year
- Outside Frame Dimensions: 34-3/4″ x 11-3/4″
- Cut-Out Dimensions: 33-5/8″ x 10-5/8″
- Clamp Ring Size: 1/8″
How will I install the VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″)?
To install the VWD AW3310 Universal Camper Van Bunk Awning Window (34-3/4″ x 11-3/4″), you will need to create a template. To make a template, you can either use the aluminum framing on the backside of the window or the clamp ring we will have illustrations on using the clamp ring. Be sure to use the edge of the clamp ring that matches the aluminum frame edge of the window (the aluminum frame that goes through the wall).
Make sure that the clamp ring is taped shut, as it has an opening.
You will then trace your template onto the cardboard box sharpie, black marker, etc.. you do not want to have too wide of a marker as you want to try and be as precise as possible.
After you have drawn out the pattern on the cardboard, it is time to cut the pattern from the cardboard.
Once your template is created, clean up the rough edges and place it on your van. You will want to measure out for placement to ensure you have your template where you want it to be. To hold the template in place, you can put screws through the cardboard to hold it, have a partner hold or use tape. In our photo, we used tape. Be sure to tape the template in place on the straight areas so those are easy to draw in your line later.
Draw your template onto the wall of the van.
Once you have drawn your pattern onto the wall of the van and are happy with the placement, you are ready to cut. Reciprocating saw, skill saw, disc, air nibbler, shears, etc.
Once your hole is made, dry fit the Nomadic Universal Camper Van Bunk Sliding Window (35.43″ X 11.81″) to make sure the window fits into the hole no adjustments or extra trimming are needed. If you are good, you can add a clear coat or paint to the cut edge its not necessary, just a precaution.
Now time to install the window. Before putting the window on the van, its best to go through and make a pilot hole in all the locations around the trim ring that way, you do not round the heads of the screws when tightening the window.
Put the Nomadic Universal Camper Van Bunk Sliding Window (35.43″ X 11.81″) in place from the outside of the vehicle, allowing the aluminum mounting frame to extend through a hole in the wall. Place the clamp ring from inside most vans will have the split on the bottom. With one person holding the window in place on the outside, the other can start to screw from the inside generally; start with the two at the split in the trim ring to have that lined up then top and around you do not want to fully tighten once all screws are in place, you can then go back around and tighten them be sure to tighten evenly around for proper seal.
Vanmade Gear Camper Van Bunk Window Shades:
Vanmade Gear Camper Van Bunk Window Shades fit our Premier RV10-P Camper Van Bunk Sliding Window (Passenger Side), Premier RV10-D Camper Van Bunk Sliding Window (Driver Side), CRL VW1033R Camper Van Bunk Sliding Window (Passenger Side), CRL VW1033L Camper Van Bunk Sliding Window (Driver Side) and Flarespace 1033 Camper Van Bunk Sliding Windows. These window frames are aluminum, but this shade comes with custom steel tabs (VHB 5953 adhesive, black powder-coated to match the window frame).
- Pull tabs integrated into both the front and back to make it easy to open and close
- Mounts magnetically via very strong N48 rare-earth magnets. No holes need to be drilled
- Uses 5mm thick Low-E SSR insulation (higher R-value than competition, mold and mildew resistant, aluminum-faced on both sides, durable)
- 100% polyester UV-resistant thread
- Durable, fire-resistant, 100% recyclable, water-repellent polyester fabric that has unrivaled stability in extreme temperatures.
- Durable nylon webbing edge binding
Camper Van Window Manufacturer Warranty and Manufacturer Defect Policy:
Camper Van Window Warranty and Defect Policy
Universal Clamp-Ring Camper Van Bunk Awning Window Documents:
Universal Clamp-Ring Camper Van Bunk Awning Window Installation Instructions
WARNING: This product may expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to